Quick view Details sku: 139495 Matthews Foam Core Holder Plate MSRP: Now: $64.95 Add to Cart Quick view Details sku: 139041 Matthews Baby Plate MSRP: Now: $23.95 Add to Cart Quick view Details sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate MSRP: Now: $57.95 Add to Cart Quick view Details sku: 1382907 Manfrotto Reversible Short Stud MSRP: Now: $7.50 Add to Cart Quick view Details sku: 139489 Matthews Adapter Kit MSRP: Now: $49.95 Add to Cart Quick view Details Matthews Wall Spreader for 2 x 6 Precut Lumber MSRP: Now: $130.00 Add to Cart Quick view Details sku: 1383155 Manfrotto Safety Cable MSRP: Now: $21.95 Add to Cart Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 139041 Matthews Baby Plate MSRP: Now: $23.95 Add to Cart Quick view Details sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate MSRP: Now: $57.95 Add to Cart Quick view Details sku: 1382907 Manfrotto Reversible Short Stud MSRP: Now: $7.50 Add to Cart Quick view Details sku: 139489 Matthews Adapter Kit MSRP: Now: $49.95 Add to Cart Quick view Details Matthews Wall Spreader for 2 x 6 Precut Lumber MSRP: Now: $130.00 Add to Cart Quick view Details sku: 1383155 Manfrotto Safety Cable MSRP: Now: $21.95 Add to Cart Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate MSRP: Now: $57.95 Add to Cart Quick view Details sku: 1382907 Manfrotto Reversible Short Stud MSRP: Now: $7.50 Add to Cart Quick view Details sku: 139489 Matthews Adapter Kit MSRP: Now: $49.95 Add to Cart Quick view Details Matthews Wall Spreader for 2 x 6 Precut Lumber MSRP: Now: $130.00 Add to Cart Quick view Details sku: 1383155 Manfrotto Safety Cable MSRP: Now: $21.95 Add to Cart Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 1382907 Manfrotto Reversible Short Stud MSRP: Now: $7.50 Add to Cart Quick view Details sku: 139489 Matthews Adapter Kit MSRP: Now: $49.95 Add to Cart Quick view Details Matthews Wall Spreader for 2 x 6 Precut Lumber MSRP: Now: $130.00 Add to Cart Quick view Details sku: 1383155 Manfrotto Safety Cable MSRP: Now: $21.95 Add to Cart Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 139489 Matthews Adapter Kit MSRP: Now: $49.95 Add to Cart Quick view Details Matthews Wall Spreader for 2 x 6 Precut Lumber MSRP: Now: $130.00 Add to Cart Quick view Details sku: 1383155 Manfrotto Safety Cable MSRP: Now: $21.95 Add to Cart Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details Matthews Wall Spreader for 2 x 6 Precut Lumber MSRP: Now: $130.00 Add to Cart Quick view Details sku: 1383155 Manfrotto Safety Cable MSRP: Now: $21.95 Add to Cart Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 1383155 Manfrotto Safety Cable MSRP: Now: $21.95 Add to Cart Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 138F808 Manfrotto 9" Baby Plate MSRP: Now: $35.00 Add to Cart Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 139590 Matthews Right Angle Baby Plate MSRP: Now: $22.00 Add to Cart Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin MSRP: Now: $17.95 Add to Cart Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 1383500 Manfrotto Large Gaffer Grip MSRP: Now: $91.95 Add to Cart Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread MSRP: Now: $11.95 Add to Cart Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 139495 Matthews Foam Core Holder Plate Made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set. MSRP: Now: $64.95 Add to Cart Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 139041 Matthews Baby Plate This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. MSRP: Now: $23.95 Add to Cart Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 1382916 Manfrotto Double Ball Joint Head W/ Cam Plate The Double ball joint allows you to move the camera in any direction. Creates a quick camera platform on any superclamp. MSRP: Now: $57.95 Add to Cart Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 1382907 Manfrotto Reversible Short Stud This stud is designed to plug directly into a Super Clamp 035 socket. This allows you to mount cameras, directly or with a camera head. Attachment: 1/4" and 3/8" screws; material: brass; weight: 0.09 lbs. MSRP: Now: $7.50 Add to Cart Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 139489 Matthews Adapter Kit This adapter kit converts any Baby 5/8" pin. Especially useful to photographers whose strobes often call for mounting sizes other than 5/8". The adapter kit includes a 5/8" female adapter with a 1/4-20 male thread and one each of 5/8", 3/8", and 1/2"... MSRP: Now: $49.95 Add to Cart Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Matthews Wall Spreader for 2 x 6 Precut Lumber Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. MSRP: Now: $130.00 Add to Cart Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 1383155 Manfrotto Safety Cable The Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg)... MSRP: Now: $21.95 Add to Cart Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 138F808 Manfrotto 9" Baby Plate This baby plate allows fixtures to be mounted in places where light stands and clamps cannot be used. Length is 22,86cm. MSRP: Now: $35.00 Add to Cart Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 139590 Matthews Right Angle Baby Plate This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby... MSRP: Now: $22.00 Add to Cart Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 139678 Matthews 5/8" Drop Ceiling Clamp Pin The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand. It comes with a Cable Holder... MSRP: Now: $17.95 Add to Cart Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: 1383500 Manfrotto Large Gaffer Grip We are not playing around this sucker is BIG. Use it to clamp it on almost any pipe or tube. Two 5/8 pins for your convenience. MSRP: Now: $91.95 Add to Cart Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected
Quick view sku: 1309 1 Manfrotto Standard Stud With 3/8" Thread Use it directly with equipment that features a 3/8" socket, or with a camera head. SKU - 1382918 MSRP: Now: $11.95 Add to Cart Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected
